|
Minelab sells the gpx-4500, and gpx4500 which are the deepest metal detector. Gold Prospecting at its finest for gold nuggets Purchase your New Minelab GPX4500Which is the deepest Gold Nugget metal detector for Prospecting and Treasure hunting.
|
||||||||||||||||||||||||||
|
w Lower Pricing gp 4500 gp4500 gpx-4500
Huge Packages offered Call Today and Save!! FREE TECHNICAL SUPPORT Make sure this is the right detector for you call today! |
Step up to the next generation in High-End Gold Detection!Minelab is offering a more versatile, easy to use, gold prospecting detector that has more power and performance than ever! |
|||||||
New FeaturesLCD Function Display - The most obvious change to the GPX-4000 is the new LCD display on the rear of the control box. Simply scroll through the various functions of the detector and select the level required. All the variable level controls offer precise numeric settings for more accuracy. Now you can compare the effect of different settings precisely and easily remember your preferred levels, without the risk of settings being accidentally changed during transit or while detecting. All setting changes are saved automatically on Shut Down, and loaded up when you switch the detector on, then at anytime you can restore back to the Factory Preset settings. The Minelab Gold Nugget Detector. MINELAB GPX-4500 FEATURES NEW TIMINGS so the GPX4500 is even more versatile. Users of the GPX-4000 have learned just how valuable it is to have a range of timings to optimize the performance of the detector. In addition to the four timings found on the previous model, the GPX4500 now introduces two new timings, Enhance & Sharp. The new Enhance timing is a powerful feature, similar to the Sensitive Smooth timing, but provides an improvement in the depth and signal response on small and larger targets. The Sharp timing is more suited to quieter soils and can also be used for pin-pointing. NO-FUSS DETECTING WITH PRE-PROGRAMMED SEARCH MODES The GPX4500 offers pre-programmed search modes, for easy switch-on & go detecting. In addition to the General and Deep search modes are four others, Hi Mineral; Hi Trash; Patch and Test A modes. All 6 search modes can also be modified with your favorite settings and renamed. GB (Ground Balance) OFF for neutral soils. When searching in non-mineralized soils, ground balance can be switched off to give increased depth. This setting will be popular for treasure and relic hunters in loam or sandy soils. BACKLIGHT so you can read the LCD menu in any light, day or night. The backlight has adjustable time-out to preserve battery life. STABILIZER for the smoother threshold. The Stabilizer function is a fine tuner that gives the operator full control over the threshold stability. After all other functions are set, you will use the Stabilizer to give fine adjustment for a smoother threshold and the ability to pick up the faintest of signals. TARGET VOLUME ... Target Volume allows you to increase the strength of softer target signals. This is useful for very windy conditions; for people suffering from hearing loss; and to adjust the audio volume when using external speakers. This is a powerful feature, and will work in conjunction with the Stabilizer control, giving you the ultimate in fine tuning ability. IMPROVED DISCRIMINATION gives you access to the worst of trashy ground. When detecting in a high-trash area like a mining site or a campground, the Iron Reject function allows the operator to set the desired level of discrimination, from cautious to aggressive. This will assist detecting in areas that have previously been rejected due to the quantity of Ferrous junk. BUILT - IN AMPLIFIER allows you to hear soft target signals from deeper nuggets, more easily. The newly designed Li-Ion battery pack now has an audio amplifier built in, which boosts target signals, if using an external amplifier. The design of the amplifier and the use of high-quality low noise components ensure the signal response is clear and crisp, without the added background hum of some boosters. SETA Explained The GPX4500 by Minelab Detectors for Gold Prospecting now offers a total of six Timing options to suit different detecting conditions. Previous GP series detectors operated using one universal alignment suitable to all their timings. With so many different timing options packed into the GPX4500, it was no longer possible to rely on a single alignment, and so the Smart Electronic Timing Alignment or SETA concept was born. SETA automatically sets a precise alignment for each Timing option. What this means is that in each timing, noises caused by magnetic interference will be minimized, the threshold will remain more stable, and signals from highly magnetic rocks will be significantly reduced. This allows you to harness all the power of the GPX4500, and operate it more efficiently under different conditions. SETA technology allows each timing to operate independently and much more efficiently so that deep and small hard to hear nuggets become more obvious
|
GPX-4500 by Minelab Metal Detectors |
||||||
|
|||||||
Pre-Set Search Modes - Patch Finding, General & Deep Detecting - Different search techniques require different settings on your detector to give maximum performance for best results. If out patch finding over virgin ground your priority is to cover more ground at a faster sweep speed, you need a detector with fast target response, sharp clear signal and possibly fast ground tracking. However, carefully chaining an area that has already produced nuggets requires an entirely different set of settings. The GPX-4000 offers three pre-programmed search modes already set up for the three common search techniques - Patch finding; General detecting and Deep slow careful detecting. As you get more familiar with all the new functions of the GPX-4000, you can then program your own preferred settings for each technique, or search mode. The GP series including the 4000 are amazing for gold prospecting. |
|||||||

For a mere 870g, Minelab's new lightweight Lithium-Ion Batteries hold their charge at almost full power for hours more than conventional batteries and will operate the GPX-4000 for over 12 hours. The intelligent charging system is self-contained in the robust yet lightweight aluminium housing, offering very rapid recharge times of 3 to 4 hours, from either the 12v vehicle or Mains adaptor. Best of all, the available power of the battery can be tested at any time through the LCD display on the detector.
New
Padded Comforter BeltIncluded with the GPX-4000 is a new padded waist belt that makes wearing the battery harness all the more comfortable, you won't notice you have it on.
Accurate Metal Detectors
Since 1993
Credit Cards and PayPal Accepted
The GPX4000, is by far the deepest, most stable and most productive gold detector, ever made. Through only slightly based on the Minelab GP 3500, it has far surpasses all expectations in gold prospecting. Quietly this will also be one of the best beach detectors. Follow my logic lets say your directly hunting behind someone with another good metal detector everything still from 8 inches to potentially 6 feet down is now yours. This does not mean you will not get the 0-8 inches on the GPX-4000 only that no gold metal detector will come close. Certainly some treasures over 100's of years may be deep. Their just can not be any disadvantage to having the best gold detector ever invented. I do offer free 800 number phone assistance with each purchase. We are proud of our reputation in the arena of taking special care of our customers even AFTER they have purchased a metal detector from us. I have been hunting for over 30 years and can assist buyers in not only making the best choice but the best brand. I do not always advise the most expensive for your budget. I will be honest in letting you know what the best detector for the type of treasure hunting you are planning to do. So call 800-662-0810 if you are ready to start the hobby or just ready to upgrade your detector.
Sincerely Ron Coen
CEO/President
Also known as the gpx4500, gpx 4500, gp4500, gp 4500 gpx-4500 and the gp-4500 by Minelab.
This is one of the best gold detectors for gold prospecting in the world. Hunting gold Metal detector for nuggets is now one of the most exciting hobbies.
Be sure to call us today!
SETA automatically sets a precise alignment for each Timing option. What this means is that in each timing, noises caused by magnetic interference will be minimised, the threshold will remain more stable, and signals from highly magnetic rocks will be significantly reduced. This allows you to harness all the power of the GPX-4500, and operate it more efficiently under different conditions.
SETA technology allows each timing to operate independently and much more efficiently so that deep and small hard to hear nuggets become more obvious.”
It’s been suggested that perhaps this technology will allow the GPX4500 PI to run underneath power lines. Maybe. I myself see it as an improved ground balancing technology but will keep my ear to the ground to find out what it really does.
So, is it time to sell the old PI and get into the newest technology?? Well, for certain, it will cost you. I’m sure many will decide that the time is right. Until then, enjoy what you’ve got and may nuggets flow into your poke regardless.
Cheers,
More will be revealed in the coming weeks ..........
and here is more
Testing the GPX-4500 by Minelab was a real eye-opener, even in the worst ironstone
infested soils. The new Enhance timing is truly great, as ground noises
are virtually non existent, yet it is super sensitive, and punches deep.
The Hi Trash search mode is a big improvement, as it makes it much easier
to reject ferrous junk. The other new feature that I love is the
Stabilizer, as it allows me to get the audio as smooth as I want it. No
negative comments from me, this machine is HOT! ..... Minelab Field
Tester.
| Models | Minelab Explorer SE | GPX 4000 | NEW GPX-4500 | Sovereign GT |
| Available | Excalibur 1000 | Eureka Gold | X-Terra 30 50 | X-Terra 70 |